Submersible DRAINAGE pump BCPD 3.3-6-A-U*
- Nominal flow rate, m3/h - 12
- Nominal supply pressure, m (Lift height) - 6
- Maximum flow rate, Q max, l/s - 19
- Immersion depth, m (no more) 5
- Weight 13.5 kg
- Maximum head H max, m 12.6
- Voltage, V 230
- Rated power consumption, kW 0.9
- Network frequency, Hz 50
- Current consumption, A 4,5
- Operating mode Long lasting
OPERATING RANGE
- Optimal flow rate - 3.3 l/s (12.0 m3/h), maximum flow rate - 5.3 l/s (19.0 m3/h);
- immersion depth not more than 5 meters;
- maximum head 12.6 meters.
OBJECTIVITY Drainage submersible centrifugal electric pumps "Vodoley" series BCPD are designed for pumping water from open reservoirs, wells, as well as draining basements and cellars.
GENERAL OPERATING CONDITIONS
- temperature of pumped water is not more than 35 0 C;
- water mineralization is allowed not more than 15000 g/m3;
- size of solid particles in pumped liquid up to 10 mm;
- air must not enter the pump unit during operation;
- limit lower and upper values of ambient temperature from 5ºC to 35ºC;
- pumped water temperature not exceeding 35 0 C;
- pumping of aggressive liquids is prohibited;
- water mineralization not exceeding 15000 g/m3 is allowed;
- the pump must be fully immersed in the pumped water;
- altitude above sea level not more than 1000 m.
CONSTRUCTION The electric pump BCPD has a vertical arrangement with the bottom location of the pumping part and provides reliable operation of the float switch.
The pump modification BCPD-3,3-6-A-U is equipped with a float switch and can operate in automatic mode.
According to the degree of protection against moisture the electric pumps belong to submersible pumps according to DSTU IEC 60335-2-41 IP68 and should be operated fully submerged in water.
The plastic cover fixed on the end of the pump part serves as a base for installation of the pump on the bottom of the water body. The radial holes in the cover serve as a filter to separate the pumped water from solids.
Warranty period for all products: 24 months from the date of sale.
IMPORTANT: In order to prevent wear of the seals and pump failure, the electric pump must not be operated without water!
To order an electric pump/electric motor on our website, you need to complete several steps:
- select the model of electric pump/electric motor you are interested in in the catalogue;
- by clicking on the active window, order an electric pump/electric motor, fill out the order window;
- within 24 hours, taking into account the store’s work schedule, a manager will call you back on the mobile phone you specified to clarify the details of the order;
- after which the amount corresponding to the ordered products must be deposited into the current account IBAN UA063515330000026002052214656 MFO 351533 Bank KhGRU PJSC CB Privatbank (commission at the expense of the payer). In the payment purpose field, you must indicate: name of the goods for payment, surname, first name of the Payer (for example: Ivanov I. payment for electric pump BСPE 0.5-63 / electric motor AI1E71A2L);
- after payment and crediting of funds to the bank account of Promelektro-Kharkov LLC, the goods will be sent by the Novaya Poshta transportation service to the city and department specified by the Buyer.
IIf you have any questions about payment for goods and their delivery, please contact the store at the following phone numbers: 097 754 44 88, 095 754 44 88, or write to us on the feedback form or vodoley.ukraine@gmail.com
Thank you for choosing products manufactured by Promelectro-Kharkiv LLC.
Our team monitors the quality of products and makes sure that you have exactly the original product.
We have been producing electric pumps since 1995
A representative of the manufacturer
will contact you shortly.